Ricoh SP 5200S Operating Instructions Manual page 127

8. Select the file you want to print, and then press [Print].
The confirmation screen appears.
If you set a password in the printer driver, a password confirmation screen appears. Enter the
password.
If multiple print files are selected, and some of these require a password, the machine prints files
that correspond to the entered password and files that do not require a password. The number of
files to be printed is displayed on the confirmation screen.
If you forgot your password, ask your file administrator for help.
9. Enter the number of sets using the number keys if necessary, and then press [Yes].
You can enter up to 999 sets.
Press the [Clear/Stop] key to correct any entry mistakes.
The Stored Print file is printed.
• If you want to cancel printing, press [No] in step 9.
• If you select multiple files, the confirmation screen displays the total number of files to be printed. If
you select multiple documents, set numbers are determined based on the smallest set number
specified for a selected document.
• When printing accumulated stored print documents, you cannot change the numbers of sets.
• To stop printing after printing has started, press [Exit] until the printer screen appears, and then
press [Job Reset]. A Stored Print file is not deleted even if [Job Reset] is pressed.
Printing from the Print Job Screen
3
125