Ricoh SP 5200S Operating Instructions Manual page 161

Default: [Machine Setting(s)]
• Driver / Command
• Machine Setting(s)
• Tray 4
Specify whether the paper size and type settings applied for Tray 4 are those specified using
the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
• Driver / Command
• Machine Setting(s)
Edge to Edge Print
You can select whether or not to expand the print area.
When set to [Off], margins on all sides are 4.2 mm (0.17 inches).
When set to [On], margins on the left, right, and bottom will become 0 mm.
Default: [Off]
Default Printer Language
You can set the default printer language if the machine cannot find the printer language
automatically.
Default: [PCL]
Tray Switching
You can specify whether or not the machine automatically switches paper trays if paper of the
specified size and type is not loaded in the driver-designated tray.
Default: [Off]
Extended Auto Tray Switching
You can select whether or not to automatically switch to a suitable tray when the current tray runs
out of paper.
When [On] is set, the extended auto tray switching is priority, regardless of the printer driver
settings.
Default: [Off]
• To change default settings, see "Accessing User Tools".
• p.149 "Accessing User Tools"
System
6
159