Using The Ipp Port - Ricoh SP 5200S Operating Instructions Manual

1. Preparing the Machine
5. Click [Next >].
6. Click [Local printer attached to this computer], and then click [Next >].
7. Click [Create a new port:].
1
8. Click [Standard TCP/IP Port] in [Type of port:], and then click [Next >].
9. Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
10. Enter the machine name or IP address in the [Printer Name or IP Address] box.
The [Port Name] text box automatically obtains a port name. Change this name if necessary.
11. Click [Next >].
12. Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
13. Check that the name of the machine whose driver you want to install is selected, and then
click [Next >].
14. Change the machine name if you want, and then click [Next >].
Select [Yes] to configure the machine as default.
15. Specify whether or not to share the machine, and then click [Next >].
16. Specify whether or not to print a test page, and then click [Next >].
17. Click [Finish].
If the [Hardware Installation] message appears, click [Continue Anyway].
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.

Using the IPP Port

This describes how to install the PCL or PostScript 3 printer driver using the IPP port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
• In an IPv6 environment, you cannot use the IPP Port. Use the SmartDeviceMonitor for Client port.
26