Ricoh SP 5200S Operating Instructions Manual page 160

6. Printer Features
Tray Setting Priority
Specify whether the paper size and type settings that are applied are those specified using the
control panel, printer driver, or print command.
• Bypass Tray
Specify whether the paper size and type settings applied for bypass Tray are those specified
using the control panel, printer driver, or print command.
Default: [Driver / Command]
• Driver / Command
When the source paper tray is specified for a print job, the paper settings specified using
the printer driver or by print command are applied, regardless of any settings specified
using the control panel.
• Machine Setting(s)
The paper settings specified on the machine's control panel are applied to all print jobs.
An error will occur if the paper settings specified using the printer driver or by print
command do not match those specified using the control panel.
6
• Any Size/Type
If paper is loaded in the bypass tray, printing will be done on paper fed from the bypass
tray with the job's settings applied.
• Any Custom Size/Type
If custom size paper is specified using the printer driver or by print command, printing
will be done on paper fed from the bypass tray with the job's settings applied.
• Tray 1
Specify whether the paper size and type settings applied for Tray 1 are those specified using
the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
• Driver / Command
• Machine Setting(s)
• Tray 2
Specify whether the paper size and type settings applied for Tray 2 are those specified using
the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
• Driver / Command
• Machine Setting(s)
• Tray 3
Specify whether the paper size and type settings applied for Tray 3 are those specified using
the control panel, printer driver, or print command.
158