Ospf Area Parameters - Avaya P330 User Manual

You can modify OSPF interfaces. For more information on editing tables,
refer to
The following parameters are displayed:
Avaya P330 Manager User Guide
Table 21-10. OSPF Interfaces (Continued)
Field
"Editing Tables" on page
Table 21-11. OSPF Area Parameters
Field
Description
The cost of using this interface. OSPF will choose
the route with the lowest total cost (metric) to
each destination.
The period of time (in seconds) between Hello
packets. All routers attached to a common
network must have the same Hello Interval.
The period of time (in seconds) that a router's
Hello packets have not been seen before the
router's neighbors declare the router down. All
routers attached to a common network must have
the same Dead interval.
Authentication Type. Possible methods are:
The password for this interface. This is only used if
the is set to
Auth Type
password may contain up to 8 characters. It may
be configured here, but not viewed.
148.
Description
A unique number identifying the OSPF area to
which this router belongs. Area ID 0.0.0.0 is
used for the OSPF backbone.
If checked, external link-state advertisements
are not imported into the area.
The total number of Area Border Routers
reachable within this area. This number is
initially zero and is calculated in each OSPF
pass.
. The
171