You can create, modify, or delete Routing Table static entries. For more
information on editing tables, refer to
* Note: Only static entries in the Routing Table can be modified.
When adding Routing Table entries on an Avaya X330WAN router, you
can configure the next hop method in the Form View. Available next hop
methods include:
Avaya P330 Manager User Guide
Table 21-3. Routing Table Parameters (Continued)
Field
(X330WAN router
only)
Entries learned from OSPF, RIP, or local cannot be modified.
•
Next Hop - Select the
address of the next hop.
•
L2 Interface Name - Select the
and select an interface from the pull-down listbox.
•
Discard - Select the
Description
The permanence status of the route. Possible
statuses are:
• Checked - The route is not disabled when
a link on the route is down.
• Unchecked - The route is disabled when a
link on the route is down.
The preference of this route. Possible values are:
•
- Dynamic routes are preferred on this
static route.
•
- This static route is preferred on
dynamic routes.
The type of route, either local or remote.
The number of seconds since the route was last
updated.
"Editing Tables" on page
option button, and enter the IP
option button.
148.
option button,
161