Avaya P330 User Manual page 89

For USPs configured with a frame relay interface, the USP dialog box
contains five tabs:
The Frame Relay tab of the USP dialog box provides information about
the frame relay configuration of the USP.
The following table provides a list of the fields in the Frame Relay tab of
the USP dialog box and their descriptions:
Avaya P330 Manager User Guide
• Serial Port - Basic information abut the USP. For information on
the fields in the Serial Port tab of the USP - Frame Relay dialog
box, refer to "Serial Port" on page
• Advanced - Information about the channels that comprise the
interface. For information on the fields in the Advanced tab of the
USP - Frame Relay dialog box, refer to
• Frame Relay - Information about the frame relay configuration on
the USP.
• Sub-Interfaces - Information about the Channel Group's sub-frame
relays.
• DLCIs - DLCI information for the Channel Group.
6. Click . The tab of the USP dialog box appears.
Field
74.
Table 7-11. Parameters
Description
Local Management Interface Type. The Data
Link Connection Management scheme used
by the frame relay interface. Possible values
are:
• ANSI
• q933a
The state of Local Management Interface
Auto-Sensing on the interface. Possible states
include:
• Enable - The LMI type is received from
the interface at the other end of the line.
• Disable - The LMI Type is determined by
the value in the LMI Type field.
"Advanced" on page 76.
79