Changing A No-Scroll Area - Avaya Call Management System Custom Reports

To define no-scroll areas:
1. On Screen Painter, select Upper/left no-scroll .
The cursor returns to the upper left corner of the report. The following message is
displayed on the status line: Move the cursor down and right. Press
RETURN when finished.
2. To define a no-scroll area at the top, move the cursor down the wanted number of
lines. To define a no-scroll area on the left, move the cursor to the right.
CMS highlights the no-scroll area as you move the cursor.
3. Press

Changing a no-scroll area

To change a no-scroll area:
1. On Screen Painter, select Upper/left no-scroll .
The cursor returns to a position at the edge of the top and/or left no-scroll areas. The
following message is displayed on the status line: Move the cursor down and
right. Press RETURN when finished.
2. To change a no-scroll area at the top, move the cursor up or down the wanted number
of lines. To change a no-scroll area on the left, move the cursor to the right or left.
As you move the cursor, CMS highlights the no-scroll area that you add or removes the
highlight for the no-scroll area you delete.
3. Press
to save the no-scroll area.
Return
to save your changes.
Return
Defining stationary (no-scroll) areas
Issue 3.0 May 2002 115