Avaya P330 User Manual page 95

To configure the priority of DLCI traffic, select the checkboxes for the
priorities to use on the DLCI.
If only one DLCI is configured for the USP, all traffic uses the DLCI.
If more than one DLCI is configured on the USP, the priorities must be
distributed among the DLCIs, and no priority can be configured for
multiple DLCIs. For example, if there are three DLCIs configured for a
USP, the first DLCI may be configured with Primary and High priority,
the second with Medium and Normal, and the third with Low.
Avaya P330 Manager User Guide
Table 7-13. Parameters (Continued)
Field Description
The method used to create the DLCI. Possible
methods include:
• Local - The DLCI was created manually.
• Unused - The DLCI was created using
the LMI interface.
The operational status of the DLCI. Possible
statuses include:
• Active - The DLCI is active.
• Inactive - The DLCI is inactive.
• Deleted - The DLCI has been deleted.
• Invalid - The DLCI is not valid.
The Sub-Frame-Relay interface associated
with the DLCI.
The priority of traffic on the selected DLCI.
Possible priorities include:
• P - Primary
• H - High
• M - Medium
• N - Normal
• L - Low
85