Usp - Ppp Interface; Usp - Frame Relay Interface - Avaya P330 User Manual

The Select Channels and Speed screen enables you to select channels for
the new Channel Group.
To select channels, check the checkboxes next to the channels you want
included in the channel group.
For T1 ports, you can also select a speed factor using the
pull-down listbox.
To continue, click
Confirmation
The Channel Group Wizard displays a summary of the information
entered using the previous screens.
* Note: The Channel Group has not yet been created.
To make any changes to the summary information:
To create the Channel Group or apply the changes to the Channel Group's
configuration, click
the device, and the Channel Group table is refreshed.
The X330WAN expansion module may have USPs (Universal Serial
Ports). This section provides information on viewing and configuring USP
parameters.
The tabs that appear in the USP dialog box are dependant on the
encapsulation method of the selected Channel Group.
Avaya P330 Manager User Guide
. The Channel Group Wizard continues with the
Screen.
1. Click until you reach the screen you want.
2. Change the Channel Group's parameters.
3. Click until you reach the Confirmation screen.
•

USP - PPP Interface

•

USP - Frame Relay Interface

. The Channel Group information is uploaded to
Speed Factor
73