Avaya P330 User Manual page 71

The Advanced tab of the Channel Groups dialog box provides information
about the channels that comprise the selected Channel Group and the
Channel Group's speed factor.
To configure the channels that comprise the Channel Group, check the
checkboxes next to the channels you want included in the Channel
Group. Uncheck the checkboxes next to the channels you want to
remove from the Channel Group.
* Note: Channels that belong to other Channel Groups appear gray
To configure the speed factor of the Channel Group, select a Channel
Group speed factor from the
Avaya P330 Manager User Guide
Table 7-2. Parameters (Continued)
Field
3. Click . The Advanced tab of the Channel Group dialog
box appears.
with the name of the Channel Group to which they belong.
These channels cannot be added to the selected Channel
Group.
Description
The operational status of the interface.
Possible statuses include:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
Speed Factor pull-down listbox.
61