You can view and configure the PVID, Tagging Mode, and Binding Style
of selected ports using the Selection List and Port Configuration Area. In
addition, you can configure the PVID of selected ports using the
drag-and-drop method.
This section explains how to select ports for VLAN configuration.
Ports can be selected from the Tree View, Chassis View, or VLAN Tree for
VLAN Configuration.
To view the VLAN configuration of a port, select a port in the Tree View,
Chassis View, or VLAN Tree. The port's VLAN configuration appears in
the Selection List. If you select multiple ports in the Tree View, Chassis
View, or VLAN Tree, the VLAN configurations for all of the selected ports
appear in the Selection List. In addition, parameters that are common to
all ports in the selection appear in the Port Configuration Area.
For details on the information provided in the Selection List, refer to
"Selection List" on page
104
•
Selecting Ports
•
Viewing Port VLAN Settings
•
Using the Port Configuration Area
•
Drag-and-Drop
•
To select a port, click the port in the Tree View, Chassis View, or
VLAN Tree.
•
To select multiple ports, press CTRL while selecting additional
ports.
•
To select all of the ports on a module, click the module icon in the
Tree View or Chassis View.
•
To select all of the ports on the device, click the device icon in the
Tree View or Chassis View.
•
To select all of the ports associated with a VLAN (including
member ports and statically bound ports), click the VLAN in the
VLAN Tree.
98.
Avaya P330 Manager User Guide