Avaya P330 User Manual page 139

Avaya P330 Manager User Guide
This section provides the information and instructions for configuring
managers for the Avaya P330 Device. It includes the following topics:
• Trap Manager
• The Device Trap Managers Table
Managers Table.
• The Media Gateway Trap Managers Table
the TrapTable.
• The WAN Trap Managers Table
Trap Managers Table.
• Editing the Trap Managers
the Trap Managers Table.
In the event of a fault or an unusual occurrence, the Avaya P330 can
send traps to one or more Network Management Stations (NMS). To
enable this feature, you must configure the Avaya P330 with a list of the
managers' workstations. Traps are then sent to the stations listed in the
Managers table.
* Note: Up to ten managers can be assigned per device. However, it is
recommended to keep the list limited to actual and relevant
managers so as not to place undue stress on the network.
Using the Trap Managers Table, you can also configure which traps are
sent to specific managers. The columns to the right of the managers' IP
addresses represent specific traps. Checking the checkbox in a trap
column enables the manager to receive the checked trap. Managers only
receive the traps which are checked.
Media Gateway modules and X330WAN expansion modules each have
their own trap tables. Managers can be assigned to individual modules
and need not receive traps from modules for which they are not
responsible.
Overview- An overview of trap managers.
- A description of the WAN
Table- Instructions on how to edit
- A description of the Trap
- A description of
129