Avaya P330 User Manual page 72

The PPP tab of the Channel Groups dialog box provides configuration
information for the PPP interface of the selected Channel Group.
The following table provides a list of the fields in the PPP tab of the
Channel Group dialog box and their descriptions:
62
4. Click . The PPP tab of the Channel Group dialog box appears.
Field
Table 7-3. Parameters
Description
The IP address of the PPP session's peer device.
The size (in octets) of the largest datagram
that can be sent via the PPP session.
The time, in seconds, between keepalive
messages. A value of 0 means that keepalive
messages are not sent.
The administrative state of the PPP session:
• Enable - The PPP session is enabled.
• Disable - The PPP session is disabled.
The operational status of the PPP interface.
Possible statuses include:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
Avaya P330 Manager User Guide