Ip Interfaces - Avaya P330 User Manual

IP interfaces represent the logical connections of the device to the IP nets/
subnets attached to it. Each IP interface corresponds to one net/subnet.
When you create a new IP interface, RIP and OSPF interfaces are
automatically created and assigned enable status. When you delete an IP
interface, the device deletes the associated RIP and OSPF interfaces.
The following parameters are displayed:
158
Table 21-2. IP Interface Table Parameters
Field
(not for X330WAN
router)
(X330WAN router
only)
(not for X330WAN
router)
(X330WAN router
only)
Description
The name assigned to the selected IP interface.
The name assigned to the selected IP interface.
The IP address assigned to the device on this
subnet.
The IP network mask of the attached net/
subnet.
The name of the Layer 2 interface with which
this subnet is associated. Multiple subnets may
be associated with a single VLAN, so multiple IP
interfaces may be associated with the same If
Name.
The name of the Layer 2 interface with which
this subnet is associated. Multiple subnets may
be associated with a single interface, so multiple
IP interfaces may be associated with the same If
Name.
The status of the IP interface. If checked, the IP
interface is enabled.
The status of the forwarding of incoming net-
directed broadcasts to this interface. If checked,
the forwarding is enabled. If not checked, IP
directed broadcast messages destined to this
interface will be discarded and will not be
forwarded to this interface.
Avaya P330 Manager User Guide