Avaya P330 User Manual page 20

To configure the ports of a LAG, select the LAG icon in the Tree View or
the Chassis View. Ports belonging to a LAG may not be configured by
selecting the port.
Multiple ports and LAGs can be simultaneously configured using the
Get/Set Toolbar. When multiple ports or LAGs with non-identical
configurations are selected, only the parameters whose settings are
identical on the selected ports or LAGs are reflected in the Get/Set
Toolbar. For example, if a port operating at full duplex and a port
operating at half duplex are selected, neither of the duplex mode buttons
on the Get/Set Toolbar are depressed.
The table below displays the buttons on the Get/Set Toolbar and explains
their functions and settings.
You can toggle the display of the Get/Set toolbar. To toggle the display of
the Get/Set toolbar, select
10
Button Description
Get and set the port/LAG's speed: 10 Mbps, 100
Mbps, 1000 Mbps.
Get and set the port/LAG's status: Enabled, Disabled.
Get and set the port/LAG's mode: Half duplex, Full
duplex.
Get and set the port/LAG's auto-negotiation status:
Auto-negotiation Enabled, Auto-negotiation
Disabled.
Get and set the port/LAG's priority. Select a priority
level between 1 and 8 using the pull-down listbox.
Apply or cancel the configuration changes made with
the Get/Set Toolbar.
Table 2-2. Get/Set Toolbar
.
Avaya P330 Manager User Guide