Avaya P330 User Manual page 86

The Advanced tab of the USP Configuration dialog box provides advanced
information about the USP configuration.
The following table lists the configuration fields in the Advanced tab of
the USP Configuration dialog box and their descriptions:
76
4. Click the
dialog box appears.
Table 7-9. USP Configuration - Advanced Parameters
Field
tab. The Advanced tab of the USP Configuration
Description
The type of linecode. Possible values are:
• Nrz
• Nrzi
The state of the Tx clock. Possible states are:
• On - The Tx clock is inverted.
• Off - The Tx clock is not inverted.
The signal type monitored to determine the
interface's status. Possible values are:
• On - The interface monitors DSR/CTS
signals and ignores DCD signals.
• Off - The interface monitors DCD signals.
The bit pattern used to signify an idle line.
Possible patterns include:
• Flags
• Mark
The number of flags transmitted between
consecutive frames. Possible values are:
• 1
• 2
The status of the DTE loopback. Possible values
are:
• On
• Off
Avaya P330 Manager User Guide