Avaya P330 User Manual page 62

RSVP
RSVP is a protocol that signals the router to reserve bandwidth.
If RSVP is enabled, the G700 Media Gateway tries to reserve a specific
amount of bandwidth per call session. If this fails, the Media Gateway
tries to reallocate the bandwidth during the call session.
The following table lists the RSVP fields and their description.
52
Table 6-3. VoIP resources - RTCP monitoring Parameters
Field
Table 6-4. VoIP resources - RSVP Parameters
Field
Description
The status of RTCP monitoring.
• Checked - RTCP monitoring is enabled.
• Unchecked - RTCP monitoring is
disabled.
The IP address of the RTCP monitor.
The port monitored by RTCP.
The interval for RTCP reports.
Description
The Status of RSVP usage.
• Checked - The G700 Media Gateway will
try to reserve bandwidth per call. If it fails,
the G700 Media Gateway will try again
during the call.
• Unchecked - RSVP is not enabled.
The action the VoIP engine takes after an RSVP
request fails.
• Checked - The VoIP engine resends a
RSVP request if the first attempt failed.
• Unchecked - The VoIP Engine drops the
RSVP request, and the Retry Delay field is
ignored.
The interval the VoIP Engine waits after a failed
RSVP request before sending the new request.
The interval ranges between 0.5 - 60 seconds.
The type of service being provided.
Avaya P330 Manager User Guide