Avaya P330 User Manual page 88

78
Table 7-10. USP Configuration - PPP Parameters (Continued)
Field Description
The operational status of the interface. Possible
statuses include:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
IP Control Protocol. The state of IPCP for this
PPP session. IP packets can only be transmitted
and received over the PPP session when the
IPCP status is Open. Possible statuses include:
• Open
• Not-Opened
The interface's backup status. Possible statuses
include:
• Backup By - Interface x - The selected
interface is backed up by interface x.
• Backup Of - Interface x - The selected
interface is the backup interface for
interface x.
• N/A - The selected interface is not
participating in a backup scheme.
Avaya P330 Manager User Guide