Avaya P330 User Manual page 190

To associate IP addresses with a selected virtual router:
To disassociate IP addresses from a selected virtual router:
You can modify VRRP parameters. For more information on editing
tables, refer to
180
Table 21-18. VRRP Table Parameters (Continued)
Field
1. Select a virtual router in the VRRP table.
2. Ensure that the Form View is visible.
3. Enter the IP address to associate with the selected router in the
textbox under the
4. Click . The IP address is associated with the virtual router.
1. Select a virtual router in the VRRP table.
2. Ensure that the Form View is visible.
3. Select the IP address from the
4. Click . The IP address is no longer associated with the virtual
router.
"Editing Tables" on page
Description
The interval, in seconds, between VRRP
advertisement messages sent by the master
router.
The virtual MAC address of the virtual router.
The physical router's IP address to be used if it is
elected to be Master Router. The Primary IP
Address must belong to the physical router and
be on the selected VLAN.
If this parameter is set to 0.0.0.0, the IP address
which is numerically lowest will be selected.
If checked, the virtual router with the highest
priority will preempt active routers and become
the master router.
Authentication Type. Possible methods are:
The password for this interface. This is only
used if the is set to
Auth Type
password may contain up to 8 characters. It
may be configured here, but not viewed.
listbox in the Form View.
IP Addresses
IP Addresses
148.
. The
listbox in the Form View.
Avaya P330 Manager User Guide