Avaya P330 User Manual page 60

The
VoIP engines, such as the number of engines, QoS parameters, RTCP
configuration, and RSVP configuration.
General
The upper section of this dialog box displays general information common
to all VoIP engines.
The following table lists the general fields in the
VoIP Engine dialog box and their description.
QoS
QoS can be controlled either locally or remotely. If control is local, it is
possible to configure QoS, RTCP, and RSVP parameters. If control is
remote, QoS parameters are determined by the MGC.
50
VoIP resources tab provides administration parameters common to all
Table 6-1. VoIP resources - General Parameters
Field Description
The number of VoIP engines in the media
gateway.
The source of the VoIP engine's controller IP
address.
• Checked - Each VoIP engine receives its
controller IP address from the DHCP
server.
• Unchecked - The VoIP engine uses a
static IP address from the MGC list.
* Note: The Use DHCP
can be configured using the CLI. For
more information on CLI
commands, refer to the Avaya P330
User's Guide.
The minimum range of UDP ports assigned by
the call controller for RTP traffic. The value
ranges between 1 - 65534.
The maximum range of UDP ports assigned by
the call controller for RTP traffic. The value
ranges between 3 - 65535.
VoIP resources tab of the
field is read-only, and
Avaya P330 Manager User Guide