Designing Touch Panel Pages
Setting the Device Base
Press the
device address to the touch panel.
1. Enter the base address for the touch panel. The base address range is from 1 - 255. Standard
device addresses begin at 128.
2. Press
Setting the Device Used
Use the
number of devices being controlled by the touch panel.
1. Press
device number supports up to 255 programmable channel codes. The multiple device settings
allow you to create up to four unique touch panel buttons and/or pages. This value is used to
determine the current device being used by the panel.
2. Enter the number of devices being used by the touch panel.
3. Press
Adding a Page
1. Press
2. Press
20 characters.
3. Press
Setting the page color
1. Press
2. Press
3. Press
4. Select a color from the palette; the page automatically changes to the new color.
Adding a Button
To add a button to the current page:
1. Press
2. Press
create a button. The first touch point is the upper-left corner of the button.
Resizing a button
1. Press
2. Press
panel saves the button dimensions.
16
option, in the Protected Setup page (FIG. 17), to assign a base (starting)
DEVICE BASE
to save.
ENTER
option in the Protected Setup page (FIG. 17) to assign a value for the
DEVICE USED
to open the keypad and enter the panel's device number from 1 - 4. Each
DEVICE USED
to save the value.
ENTER
on the Edit bar to open the
PAGE
to open the keyboard and enter a name for the new page. Page names can be up to
ADD
to save, close the keyboard, and go to the new page.
EXIT CHANGE
to open the Edit bar on the newly created page.
EDIT
on the Edit bar to open the
PAGE
to open the color palette.
PAGE COLOR
on the Edit bar to open the
BUTTON
to open the
ADD
ADD BUTTON
on the Edit bar to open the
BUTTON
. Then, touch any edge of the button and drag. Removing your finger from the
RESIZE
menu.
PAGE
menu.
PAGE
menu.
BUTTON
operation bar. On the LCD screen, touch and drag to
menu.
BUTTON
4" Color Touch Panels