Adding A Bargraph Or Joystick Button; Setting Bargraph And Joystick Properties; Setting The Level Code; Adjust Sensors Setup Page - AMX AXD-CP4/PB Instruction Manual

Designing Touch Panel Pages

Adding a bargraph or joystick button

Create a new button using the Add operation bar in the
1. Press
2. Press
3. Press any button to open the Button Properties page.
4. Press
Properties page.

Setting Bargraph and Joystick Properties

Use the Button Properties page to set channel, level, and button colors. Refer to the Setting the
variable text code section on page 18 and the Setting the channel code section on page 17 for
further information. Refer to the Setting the button colors for channel-off conditions section on
page 18 for more information on colors for channel-off conditions.

Setting the level code

Level buttons set the device and number codes for the touch panel.
Joysticks use two level numbers. The first is for the X-axis and the second for the
Y-axis. You only need to specify the first level.
1. Press
2. Enter 1, 2, 3, or 4 in the keypad. The programming software uses device codes
1 - 4 to identify the touch panel.
3. Press
Properties page.
4. Press
5. Enter a number 1 – 8. Each device can have from 1 – 8 levels except joysticks, where the range
is 1 – 7.
6. Press

Adjust Sensors Setup Page

The button illumination, infrared, and light sensors on the CP4 panels come factory defaulted with
values that can be changed by each user to suit their needs. Refer to the Programming section on
page 25 for more detailed information on commands.
This page is used to configure the various features of and parameters for the CP4 panel sensors. To
access the Sensors Setup page:
1. From the Main page press the
2. Press
3. Choose from any of the sensor setup buttons on the Adjust Sensors page (FIG. 20).
20
in the Edit bar to open the
BUTTON
in the Button menu to open the
PROPERTIES
to open the
BUTTON TYPE
to open a keypad and set the device number.
DEV
to save the level device number, close the keypad, and return to the Button
ENTER
to open a keypad and set the level number assigned to the device.
NUM
to save, close the keypad, and return to the Button Properties page.
ENTER
SETUP
from the Setup page (FIG. 16 on page 15).
ADJUST SENSORS
BUTTON
menu.
BUTTON
PROPERTIES
menus. Choose a button type to open its Button
BUTTON
button.
menu.
operation bar.
4" Color Touch Panels