Firmware Pages And Descriptions; Overview; Setup Navigation Buttons - AMX NXD-1200VG Operation/Reference Manual

Firmware Pages and Descriptions

Overview

This section describes each firmware page and their specific functional elements.

Setup Navigation Buttons

The Setup Navigation Buttons (FIG. 100) appear on-screen when the Setup page is active.
Modero Setup
Navigation Buttons
FIG. 100 Setup Navigation Buttons
These Navigation Buttons are specific to these Modero panels and include the specific elements described in the
following table:
Setup Navigation Button Elements
Protected Setup: Press the Protected Setup button to access the Protected Setup page section that provides access to
Information:
Time:
Audio:
Video:
VG Series Modero Touch Panels
the panel's sensors, calibration features, and connection settings.
• Refer to the Protected Setup Navigation Buttons section on page 132 and Protected Setup
Page section on page 133 for more detailed information.
Pressing this button opens a slideout menu that displays two buttons: Panel Information and Project
Information.
Press the Panel Information button to access the Panel Information page and view panel specific
information such as resolution, memory, etc. (read-only). Refer to the Panel Information Page section
on page 117 for more detailed information.
Press the Project Information button to access the Project Information and view the TPD4 project file
properties currently loaded on the selected panel (read-only). Refer to the Project Information
Page section on page 118 for more detailed information.
Press the Time button to access the Time & Date Settings page, where you can alter the time and
date settings on the Master.
• Refer to the Time & Date Settings Page section on page 119 for more detailed information.
Press the Audio button to access the Audio Settings page, where you can alter the audio parameters
on the Modero panel.
• Refer to the Audio Settings Page section on page 120 for more detailed information.
Press the Video button to access the Video Settings page, where you can set the video properties for
incoming video.
• This button only appears on Color Video (CV) capable touch panels.
• Refer to the Video Settings Page section on page 122 for more detailed information.
Firmware Pages and Descriptions
115