Installing Touch Panel Pages From An External Disk - AMX Modero G5 Instruction Manual

2.
Insert the USB stick into an available USB port. This may require disassembling wall-mounted touch panels to
access the USB ports if a USB extension was not already installed.
3.
From the Firmware Update window, select Install Firmware from USB to open the KIT File Browser window
(FIG. 75).
FIG. 75 KIT File Browser window
4.
Select the KIT file to be installed.
5.
The device will now upload the new firmware (FIG. 76) and then reboot.
FIG. 76 Update Progress display
For more information on updating firmware for your touch panel, particularly
concerning the format and the directory placement of the firmware upgrade, please
refer to the Upgrading Firmware section of the touch panel's Operation Reference
Guide. The Operation Reference Guides for the Modero X Series G5 touch panels
are available at www.amx.com.

Installing Touch Panel Pages From an External Disk

TPDesign5 page files may be loaded onto a touch panel, both via TPDesign5 and through files saved to a USB-enabled
external drive.To load TPD5 pages via USB:
1.
Download the panel pages and save them to a USB stick or other external drive with USB capability.
2.
Insert the USB stick into an available USB port. This may require disassembling wall-mounted touch panels to
access the USB ports if a USB extension was not already installed.
3.
From the Reset & Update window, select Install Pages from External Disk to open the TP5 File Browser window
(FIG. 77). The page files or the folder in which they are stored will appear in the window.
Modero G5 Touch Panels - Configuration and Programming
Settings Menu
45