Table of Contents
Advertisement
1.1.1.32
1.1.1.32
Storage environment requirements
1.1.1.32
1.1.1.32
Temperature: 10°C ~ 30°C.
Humidity: 30% ~ 70%.
There should be basically vibration-free, low dust concentration and free of
strong electromagnetic interference with good antistatic measures taken and
wide site space.
prompt
3.5.2. Unpacking
3.5.2.
3.5.2.
3.5.2.
Packing box of the general chassis
1.1.1.33
1.1.1.33
1.1.1.33
1.1.1.33
The assembly wooden box is used as the packing box of 3P@C 4450E. It is connected and fixed
with plastic clips. Figure 3-2 shows its outside view.
Figure 3-2 Appearance of the packing box
Inside the packing box, there are packing materials such as foam pad, antistatic plastic bag and
desiccants. The equipment is placed in the antistatic plastic bag. Its upper edge, bottom edge and
all the corners are protected with the foam pads, and the foam pads are connected and fixed with
paper boards, as shown in Figure 3-3:
3P@C Installation Manual
Page 3-10
Reproduction and communication in any form prohibited without the written
permission of SAGEM SA
Preferably you should unpack inside or near the equipment
room to avoid hard moving of the equipment or damaged to
the equipment.
SAGEM 3P@C
Advertisement
Table of Contents
