Table of Contents
Advertisement
Command
quit
show history
show services
show version [all |<0-15>]
terminal length <value>
who
who am i
show idle-timeout
show time
All commands except enable in the read-only mode are also effective in the configuration mode, so they are
omitted in Table 6-3.
Table 6-3 Common commands in the configuration mode
Command
enable-password
config time <1970-2069>
<1-12>
<HH:MM:SS>
erase {startup-config}*1
hostname <hostname>
idle-timeout <value>
show running-config
show startup-config
save {configuration}*1
6.3.3. Online Help of Command Line
6.3.3.
6.3.3.
6.3.3.
3P@C 4450E provides abundant online help information to help users input the commands.
You can enter <help> in any command mode to get a brief description of the help system.
There is built-in syntax help in the command line interface.If you are not sure of the syntax of a
certain command, you may input the known former part of the command and key in "?". Then
the command line prompts you the meaning or function of the command. If you input a space
and "?" after the command, the command line will prompt the possible commands after the
part of command you input. Then you may continue to input the command as prompted till the
following appears:
<cr> Just Press Enter to Execute command!
It shows that the complete command has been input. Press Enter to execute it.
3P@C Installation Manual
Page 6-5 Reproduction and communication in any form prohibited without the written permission of SAGEM SA
Function
Quits the command line and disconnects (this
command has the same function as logout )
Shows the history commands that have been
input
Shows the services provided by the current
system
Shows the version information of cards
Sets the number of lines output per screen of the
terminal
Shows the users connected to the switch
currently
Shows the information of the current user
Shows the idle timeout time
Shows the current time of the system
Function
Modifies your own password to enter the
configuration mode
Configures the system time
<1-31>
Erases the system start-up configuration saved in
the switch
Renames the switch, for example, the default
name of this switch is 3P@C
Sets the idle waiting time of 3P@C 4450E before
the system automatically enters the state before
login
Shows the running configuration of the system
Shows the startup configuration of the system
Writes and saves the running configuration in the
switch
SAGEM 3P@C
Advertisement
Table of Contents
