Figure 4-55 Select The Terminal Emulation Type - Sagem 4450E Hardware Installation Manual

SAGEM 3P@C
Click the Properties item under the File menu of the HyperTerminal, and click Settings in the pop-up window, as
shown in Figure 4-55:

Figure 4-55 Select the terminal emulation type

Set the terminal type as VT100.
If the switch has been started (automatically upon power-on), you can conduct the related operations now. Click
Dial in the toolbar to log in to the system.
3P@C Installation Manual
Page 4-40
Reproduction and communication in any form prohibited without the written permission of SAGEM SA