Figure 2-20 Front View Of The Ds-1Glx Module; Table 2-9 Status Definitions Of The Link And Act Leds On The Ds-1Glx Module; Table 2-10 Gigabit Long-Wave Optical Interface Features Of The Ds-1Glx Module - Sagem 4450E Hardware Installation Manual

Figure 2-20 Front view of the DS-1GLX module

The front panel of the DS-1GLX module is composed of the following parts:
1 standard SC gigabit long-wave optical interface
1 LINK status indicator
1 ACT status indicator
Of the above, the different states of LINK and ACT indicators show the port operating status. For
details, refer to Table 2-9.
Indicators of the DS-1GLX module
1.1.1.12 1.1.1.12
1.1.1.12 1.1.1.12

Table 2-9 Status definitions of the LINK and ACT LEDs on the DS-1GLX module

LED
LINK
ACT
1.1.1.13 1.1.1.13 Interface features of the DS-1GLX module
1.1.1.13 1.1.1.13

Table 2-10 Gigabit long-wave optical interface features of the DS-1GLX module

Module
type
DS-1GLX
The fiber system is divided into two types by the optical transmission mode: Multi-mode fibers and
single-mode fibers. The single-mode fiber is the fiber that transmits signal in a single mode at the
given wavelength. Its core is about 4 ~ 10µm, which is quite small. The fiber features high
transmission bandwidth and large transmission capacity.
3P@C Installation Manual
Page 2-16
Reproduction and communication in any form prohibited without the written permission of SAGEM SA
SC long-wave
optical interface
Display
Color Description
state
Green Solid on After a stable connection between a port and the
equipment is established, the indicator of the port
stays solid on.
Off The link on the port is down.
Green Flashing Data are being received/transmitted on the port
Off No data are being received/transmitted on the
port.
Quantity Interface
of type
interfaces
1 SC
DS-1GLX gigabit
interface module
Status LED
Interface Fiber
attributes specifications
1000Base- 9/125
LX single-mode
fiber
wavelength
1,310 nm
SAGEM 3P@C
Transmission
distance
µm 10km
with a
of