CHAPTER 2
2.
This chapter describes hardware structure of the 3P@C 4450E, including the whole-equipment
configurations and the description of each service module.
2.1. Shelf Configuration
2.1.1. Structure of the General Chassis
The general chassis of 3P@C 4450E is called 3P@C 4450E-IPDSLAM-10U general chassis kit. It
contains a 10U chassis, a backplane, a fan module, a fan mounting support and an air deflector frame.
Its outside view is shown in Figure 2-1.
Figure 2-1 General chassis of 3P@C 4450E
The general chassis composition of 3P@C 4450E is described in Table 2-1:
Table 2-1 General chassis composition of 3P@C 4450E
Name
10U chassis
Fan
module
Air deflector
frame
3P@C Installation Manual
Page 2-1 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
3P@C 4450E Hardware Structure
10U chassis
Fan module
Air deflector
frame
Height
Composition
10U
Slots 0 ~ 1
Slots 2 ~ 15
1U
6 fans inside
2U
Slant
inside
Application
For SMUB
For ADUB, ADUC or VDUB
For system cooling
spacer
Air ducts (inlet from the front and
outlet from the rear)