Table 7-3 Relevant Parameters Downloaded By The Network Port Of System Control Board - Sagem 4450E Hardware Installation Manual

Serial
No.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Step 4: Change relevant parameters of the network port
Select c , and press Enter to begin interactive setting.

Table 7-3 Relevant parameters downloaded by the network port of system control board

Item
boot device
processor number
host name
file name
inet on ethernet(e)
inet
:
host inet(h)
3P@C Installation Manual
Page 7-4 Reproduction and communication in any form prohibited without the written permission of SAGEM SA
Item Description
c Change the current download configuration parameter
(user name and password)
a Download the system image file (program file of system
control board) to 3P@C 4450E
A Download the system image file (program file of system
control board) to 3P@C 4450E, and reboot the system
s Download the configuration file
fa Download the ADU FPGA code
fv Download the VDU FPGA code
da Download the ADU chipset code
fa Download the VDU chipset code
remove Download the file to Flash
<filename>
remove Delete the files in Flash
<filename>
rename Rename the files in Flash
<old_filename>
<new_filename>
erase fileinfo Delete all files in Flash
show flash Show the information of all files in Flash
x Exit from the current download mode
Default
value
0
:
on backplane(b)
Description
boot device name, which generally need
not be modified
Need not be set
Need not be set
The name of the version file to be
upgraded. It needs to be modified as the
actual system file name.
hos_smu_v02r00b09d06.bin
The IP address assigned to the network
port of the system control board. It must
share the same network segment with
the IP address of the host of the FTP
server.
Need not be set
The IP address of the host of the FTP
server. It must share the same network
segment with the IP address assigned to
SAGEM 3P@C