1-Port Gigabit Short-Wave Optical Interface Module (Ds-1Gsx); Figure 2-21 Front View Of The Ds-1Gsx Module; Table 2-11 Status Definitions Of The Link And Act Leds On The Ds-1Gsx Module - Sagem 4450E Hardware Installation Manual

prompt

2.5.2. 1-port Gigabit Short-wave Optical Interface Module (DS-1GSX)

2.5.2. 2.5.2. 2.5.2.
The DS-1GSX module provides 1 gigabit short-wave Ethernet optical interface. The physical interface
is a standard SC optical interface whose maximum transmission distance is 550 m. A pair of multi-
mode fibers is required for it. The fiber length and peer interface type depend on the real situation.
Structure of the DS-1GSX module
1.1.1.14 1.1.1.14 1.1.1.14 1.1.1.14
The front panel of the DS-1GSX module is shown in the following figure:

Figure 2-21 Front view of the DS-1GSX module

The front panel of the DS-1GSX module is composed of the following parts:
1 standard SC gigabit short-wave optical interface
1 LINK status indicator
1 ACT status indicator
Of the above, the different states of LINK and ACT indicators show the port operating status. For
details, refer to Table 2-11.
1.1.1.15 1.1.1.15 Indicators of the DS-1GSX module
1.1.1.15 1.1.1.15

Table 2-11 Status definitions of the LINK and ACT LEDs on the DS-1GSX module

LED
LINK
ACT
3P@C Installation Manual
Page 2-17
Reproduction and communication in any form prohibited without the written permission of SAGEM SA
To know more about fibers, please refer to the contents in
Appendix C.
DS-1GSX gigabit
interface module
Display
Color Description
state
Green Solid on After a stable connection between a port and the
equipment is established, the indicator of the port
stays solid on.
Off The link on the port is down.
Green Flashing Data are being received/transmitted on the port
Off No data are being received/transmitted on the
port.
DS-1GSX gigabit
interface module
Status LED
SAGEM 3P@C