Figure 2-12 Front View Of The Smub; Table 2-2 Interface Features Of The Smub; Table 2-3 Type Of Uplink Interface Modules - Sagem 4450E Hardware Installation Manual

Figure 2-12 Front view of the SMUB

Interface features of the SMUB
1.1.1.2 1.1.1.2 1.1.1.2 1.1.1.2

Table 2-2 Interface features of the SMUB

Interface
name
Console
interface
Ethernet
uplink
interface
Extended slots of the SMUB
1.1.1.3 1.1.1.3
1.1.1.3 1.1.1.3
The SMUB provides 2 extended slots for installing uplink interface modules. 3P@C 4450E supports
the following uplink interface modules:

Table 2-3 Type of uplink interface modules

Module type
DS-1GLX
DS-1GSX
3P@C Installation Manual
Page 2-8
Reproduction and communication in any form prohibited without the written permission of SAGEM SA
System running
state LED
10/100 Base-TX
Uplink interface
Quant Interface Interface
ity type attributes
1 RJ-45 RS-232C
1 RJ-45 10/100Base
-TX
Name
1-port gigabit long-
wave optical
interface module
1-port gigabit short-
wave optical
interface module
Description
Located at the uppermost of the
SMUB, the Console interface can
be used to manage and configure
3P@C 4450E via the command
line interface.
Located at the lowermost of the
SMUB, it is used to connect the
VDSL and ADSL subscribers to the
IP network.
Description
Providing 1 long-wave optical
uplink interface of 1G rate
Providing 1 short-wave optical
uplink interface of 1G rate
SAGEM 3P@C
Upper puller
adapter
Console
interface
Uplink interface
extended slot
Lower puller
adapter
Interface
type
SC
SC