Viewing The Current Configuration; Querying The Port Status - Sagem 4450E Hardware Installation Manual

For example:
3P@C(config)# show version 6
--------- Board In Slot 6 Version Information ---------
Board Type : ADU_GS_32
Hardware Version : V0.2:
FPGA Version : A1.3
CPLD Version : 1.0
ADU Serial Number : API-71
ADU Firmware Version : X3727
ADU Vendor ID : GSPN
--------------------------------------------------------

7.3.2. Viewing the Current Configuration

7.3.2. 7.3.2. 7.3.2.
Operation Guide
Execute the command show running-config to show the running configuration of the equipment.
Reference index
The result contains the configuration commands and parameters of all modules.

7.3.3. Querying the Port Status

7.3.3.
7.3.3. 7.3.3.
Operation Guide
Execute the command show port [<portlist>|all|active] to query the status information of all ports or specified
ports, including the up/down state, port rate, duplex, flow control and self-negotiation mode.
Reference index
The Up/Down state is consistent with the indication in the panel indicator. The rate, duplex, flow control and self-
negotiation mode of the port are all correct.
For example: View the status of Port 7:7.
3P@C(config)# show port 7:7
--------------------------------------------------------------------------
Port:<7:7> 's Current Value Information
Link state : Up
Port Default VLAN ID
Remote modem connection : YES
Service Mode
3P@C Installation Manual
Page 7-15 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
Port state
: 2374 Port VLAN name
: G.dmt Channel Mode
: enabled
: dsl2374
: Interleaved
SAGEM 3P@C