Figure 4-53 Select The Connecting Serial Port; Figure 4-54 Communication Parameter Setting - Sagem 4450E Hardware Installation Manual

Figure 4-53 Select the connecting serial port

Then set the parameters such as the communication rate, as shown in Figure 4-54.

Figure 4-54 Communication parameter setting

You must set them as follows:
Baud rate – 9600
Data bit - 8
Stop bit - 1
Parity bit – None
Flow control – None
3P@C Installation Manual
Page 4-39
Reproduction and communication in any form prohibited without the written permission of SAGEM SA
SAGEM 3P@C