Table 7-1 Bootrom command
Seria
l No.
1
2
3
4
5
Step 3: Enter the upgrade submenu
After entering the Bootrom main menu, select the fourth option: dl to enter the sub-menu as follows:
you enter download mode
?
- List all available commands
h
- List all available commands
n
- Exchange load mode(default FTP)
p
- Print boot parameters
c
- Change boot parameters
a
- Download system image to Flash
A
- Download system image and boot
s
- Download system base config information
fa
- Download ADU fpga code
fv
- Download VDU fpga code
da
- Download ADU chip code
dv
- Download VDU chip code
load <filename>
del <filename>
rename <oldname> <newname> - Rename a file in Flash
erase fileinfo
show flash
x
- Quit
Table 7-2 Upgrade submenu in the network port
Serial
No.
1
2
3
4
3P@C Installation Manual
Page 7-3 Reproduction and communication in any form prohibited without the written permission of SAGEM SA
Item
Description
?
List all available commands
h
List all available commands
g
Exit from the menu, and continue the system load
process. That is, implement the system boot file in the
current system.
dl
Enter the download mode to download the configuration
file of system file
r
Reboot the system
- Download file to Flash
- Delete a file in Flash
- Erase files in Flash, all files will be lost!
- Show Flash file info
Item
Description
?
List all available commands
h
List all available commands
n
Change the download mode, use Xmode or FTP (default)
mode
P
Print the current download configuration parameters
SAGEM 3P@C