Figure 2-23 Front View Of The Ds-2Fsm Module; Table 2-15 Status Definitions Of The Link And Act Leds On The Ds-2Fsm Module; Table 2-16 Interface Features Of The Ds-2Fsm Module - Sagem 4450E Hardware Installation Manual

Figure 2-23 Front view of the DS-2FSM module

The front panel of the DS-2FSM module is composed of the following parts:
2 standard SC 100M single-mode optical interfaces
2 LINK status indicator
2 ACT status indicator
Of the above, the different states of LINK and ACT indicators show the port operating status. For
details, refer to Table 2-15.
Indicators of the DS-2FSM module
1.1.1.21 1.1.1.21 1.1.1.21 1.1.1.21

Table 2-15 Status definitions of the LINK and ACT LEDs on the DS-2FSM module

LED
LINK
ACT
1.1.1.22 1.1.1.22 Interface features of the DS-2FSM module
1.1.1.22 1.1.1.22

Table 2-16 Interface features of the DS-2FSM module

Module
type
DS-
2FSM
3P@C Installation Manual
Page 2-20
Reproduction and communication in any form prohibited without the written permission of SAGEM SA
DS-2FSM 100M
interface module
Status
LED
Display
Color Description
state
Green Solid on After a stable connection between a port and the
equipment is established, the indicator of the port
stays solid on.
Off The link on the port is down.
Yellow Flashing Data are being received/transmitted on the
optical port.
Off No data are being received/transmitted on the
optical port.
Quantity Interface
of type
interfaces
2 SC
SC single-mode
optical interface
Interface Fiber
attributes specifications
100Base- 9µm
FSM mode fiber
SAGEM 3P@C
Transmission
distance
single- 15km