Understanding The Displayed Information; Print Job Information; Print Log Information - Lanier LD225 Network Manual

Understanding the Displayed Information

This section explains how to read status information returned by the network in-
terface board.

Print Job Information

Use the following command to display print job information:
• UNIX: Use the "info" command and "rsh", "rcp", and "ftp" parameters.
• mshell: Use the "info" command.
Item
Rank
Owner
Job
Files
Total Size
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about mshell info commands, see p.93 "info".

Print Log Information

This is a record of the most recent 20 jobs printed.
Use the following command to display print log information:
• UNIX: Use the "prnlog" command and "rsh", "rcp", and "ftp" parameters.
• telnet : Use the "prnlog" command. See p.95 "prnlog".
Item
ID
User
Page
Result
Description
Print job status.
• Active
Printing or preparing for printing.
• Waiting
Waiting to be transferred to the printer.
Print request user name.
Print request number.
The name of the document.
The size of the data (spooled).
The default is 0 bytes.
Description
Print request ID.
Print request user name.
Number of pages printed
Print Request Result
Communication Result
• OK
Print was completed normally. However, the print result may not be
as required due to printer problems.
Understanding the Displayed Information
4
115