Lanier LD225 Network Manual page 55

C
Enter the attribute you want to
use when searching for e-mail ad-
dresses, and then press [OK].
Note
❒ The attribute value may change
depending on the server envi-
ronment. Check the attribute
value complies with your server
environment before setting it.
❒ You can leave items blank, but
you cannot leave attributes
blank when searching for e-mail
addresses from the LDAP serv-
er Address Book.
To set search options
To search the LDAP server data using a
keyword other than prepared keywords
such as Name, E-mail Address, FAX
Number, Company Name, and Depart-
ment Name, specify the attribute for the
keyword registered in your LDAP serv-
er, and the name to be displayed on the
control panel during the search. For ex-
ample, to search e-mail addresses by
employee number, enter "employ-
eeNo." in the Attribute field, and "Em-
ployee No." in the key display field.
A
Press [TNext] three times.
B
Press [Change] under [Attribute].
C
Enter the attribute you want to
use when searching for e-mail ad-
dresses, and then press [OK].
Note
❒ The attribute value may change
depending on the server envi-
ronment. Check the attribute
complies with your server envi-
ronment before setting it.
D
Press [Change] under [Key Display].
E
Enter the key display, and then
press [OK].
The registered "key display" appears
as a keyword for searching LDAP.
• Without key display registration
• With key display registration
Note
❒ The key does not appear on the
search screen unless both "At-
tribute" and "Key Display" are
registered. Make sure you register
both to use the optional search.
LDAP Server Settings
49
2