Set - Lanier LD225 Network Manual

• Host becomes the default setting.
• IP address of destination can be
specified.
Remote Maintenance by telnet
❖ Route Flush
msh> route flush
Note
❒ The maximum number of routing
tables is 16.
❒ Set a gateway address when com-
municating with devices on an ex-
ternal network.
❒ The same gateway address is shared
by all interfaces.

set

Use the "set" command to set the pro-
tocol information display "active" or
"inactive".
❖ View settings
The following command displays
protocol information (active/inac-
tive).
msh> set tcpip
msh> set appletalk
msh> set netware
msh> set smb
msh> set scsiprint
• scsiprint is available when the
optional IEEE 1394 interface
board is installed.
msh> set ip1394
• ip1394 can be specified only when
the IEEE 1394 interface is installed.
msh> set protocol
• When protocol is specified, infor-
mation about TCP/IP, Apple-
Talk, Netware, and SMB appears.
msh> set lpr
msh> set ftp
msh> set rsh
msh> set diprint
msh> set web
msh> set snmp
4
97