Sprint; Status; Syslog; Upnp - Lanier LD225 Network Manual

Monitoring and Configuring the Printer
• The "spoolsw" command for con-
figuring Job Spool settings is avail-
able only when the optional hard
disk is installed.
❖ View settings
The Job Spool setting appears.
msh> spoolsw
❖ Job Spool setting
msh> spoolsw spool {on | off}
Note
❒ Specify "on" to enable Job Spool,
4
or "off" to disable it.
❖ Resetting Job spool setting
msh> spoolsw clear job {on
| off}
• When the printer power is cut
during job spooling, this deter-
mines whether to reprint the
spooled job.
❖ Protocol configuration
msh> spoolsw diprint {on |
off}
msh> spoolsw lpr {on | off}
msh> spoolsw ipp {on | off}
msh> spoolsw smb {on | off}
msh> spoolsw ftp {on | off}
• You can specify the settings for
diprint, lpr, ipp, and smb.

sprint

Use the "sprint" command to make
settings for IEEE 1394 (SCSI print).
❖ View settings
IEEE 1394 (SCSI print) settings are
displayed.
msh> sprint
102
❖ Bidirectional configuration for IEEE
1394 (SCSI print)
Use this setting to set IEEE 1394
(SCSI print) bidirectional.
The default is "on".
msh> sprint bidi {on | off}

status

The printer status can be checked us-
ing the following command:
❖ Messages
msh> status
Reference
For details, see p.107 "Current
Printer Status"

syslog

Use the "syslog" command to display
the information stored in the printer's
system log.
❖ View message
msh> syslog
Reference
For details about the information
displayed, see p.121 "System Log
Information".

upnp

Use the "upnp" command to display
and configure the universal plug and
play.
❖ Public URL display
msh> upnp url
❖ Public URL configuration
msh> upnp "url string"
• Enter the URL string in the char-
acter string.