Configuring The Network Interface Board - Lanier LD225 Network Manual

Monitoring and Configuring the Printer
Item
Result
Time
User ID
JobName
4
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about mshell prnlog commands, see p.95 "prnlog".

Configuring the Network Interface Board

Use the following command to display network interface board settings:
• telnet : Use the "show" command. See p.98 "show".
Item
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
Netware
SMB
IP over 1394
SCSI print
Device Up/Down
USB
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location
116
Description
• NG
Printing was not completed normally.
• Canceled
An "rcp", "rsh", or "lpr" command print request was canceled, possi-
bly due to the printing application. Not applicable to the "ftp" or
"rprinter" command.
Time the print requested was received.
Time of print request reception
Printer driver-configured User ID.
Appears when the print request ID is specified.
Name of the document for printing
Appears when the print request ID is specified.
Description
[up] means "active" and [down] means "inactive".
Internal version number
Internal version number
Printer name
Comment
Location of the printer in the SNMP and Rendezvous information