Lanier LD225 Network Manual page 132

Monitoring and Configuring the Printer
Message
started.
Started.
Terminated.
The print server received error <error number>
during attempt to log in to the network. Access
to the network was denied. Verify that the print
server name and password are correct.
usbd is disabled.
WINS wrong scopeID=<Scope ID>
4
WINS name registration: No response to serv-
er<WINS server address>
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about "syslog" command, see p.102 "syslog".
126
Problem and solutions
The direct print service has started.
The rendezvous function is enabled.
The rendezvous function is disabled.
Login to the file server failed. The print server
is not registered or a password is specified.
Register the print server without specifying a
password.
Plug and Play function and printing is disabled
because usbd is disabled in the security mode.
Enable usbd in the security mode.
An invalid scope ID was used. Use a valid
scope ID.
There was no response from the WINS server.
Check the correct WINS server address is en-
tered. Alternatively, check the WINS server is
functioning properly.