Using Smartdevicemonitor For Client; Monitoring Printers; Checking The Machine Status; When Using Ipp With Smartdevicemonitor For Client - Lanier LD225 Network Manual

Using SmartDeviceMonitor for Client

To view the status of machines using
SmartDeviceMonitor for Client, con-
figure SmartDeviceMonitor for Client
beforehand.

Monitoring Printers

Follow the procedure below to moni-
tor the machine using SmartDevice-
Monitor for Client.
A
Start SmartDeviceMonitor for Cli-
ent.
The SmartDeviceMonitor for Cli-
ent icon appears in the task tray.
B
Right-click the SmartDeviceMon-
itor for Client icon, and check that
the machine appears on the pop-
up menu.
C
Click [Options...] on the pop-up
menu if the machine does not ap-
pear on the pop-up menu.
The [SmartDeviceMonitor for Client -
Options] dialog box appears.
D
Click the machine you want to
monitor, and then select the [To Be
Monitored] check box in the [Moni-
toring Information Settings] area.
Note
❒ To display the machine status in
the task tray using the SmartDe-
viceMonitor for Client icon, se-
lect the [Displayed on Task Bar]
check box.
❒ For details about status icons,
see SmartDeviceMonitor for
Client Help.
Using SmartDeviceMonitor for Client
E
Click [OK].
The dialog box closes and the con-
figured machine is monitored.

Checking the Machine Status

Follow the procedure below to check
machine status using SmartDevice-
Monitor for Client.
A
Start SmartDeviceMonitor for Cli-
ent.
B
For status details, right-click the
SmartDeviceMonitor for Client
icon, and then click the machine.
The machine status appears in the
dialog box.
Note
❒ For details about items in the di-
alog box, see SmartDeviceMon-
itor for Client Help.
When Using IPP with
SmartDeviceMonitor for Client
When using IPP with SmartDevice-
Monitor for Client, note the following:
• The network printer can only re-
ceive one print job from SmartDe-
viceMonitor for Client at a time.
While the network printer is print-
ing, another user cannot access it
until the job is finished. In this case,
SmartDeviceMonitor for Client
tries to access the network printer
until the retry interval expires.
4
81