Passwd; Prnlog; Rendezvous - Lanier LD225 Network Manual

❖ Setting login mode for file server
msh> netware login server
❖ Setting login mode for NDS tree
msh> netware login tree
❖ Setting login mode for NDS tree name
msh> netware tree "NDS name"

passwd

Use the "passwd" command to change
the remote maintenance password.
❖ Changing the Password
msh> passwd
• Enter the current password.
• Enter the new password.
• Enter the new password once
again.
Note
❒ Be sure not to forget or lose the
password.
❒ The password can be entered using
up to 32 alphanumeric characters.
Passwords are case-sensitive. For
example, "R" is not the same as "r".

prnlog

Use the "prnlog" command to obtain
printer log information.
❖ Print logs display
msh> prnlog
• Displays 20 previous print jobs.
msh> prnlog "ID Number"
• Specify the ID number of the
displayed print log information
to display additional details
about a print job.
Remote Maintenance by telnet
Note
❒ For details about displayed con-
tents, see p.107 "Getting Printer In-
formation over the Network".

rendezvous

Use the "rendezvous" command to
display rendezvous-related settings.
❖ View settings
Rendezvous settings are displayed.
msh> rendezvous
❖ Current computer name display
msh> rendezvous cname
❖ Display information about the current
printer location
msh> rendezvous location
❖ Rendezvous computer name setting
You can specify the rendezvous
computer name.
m s h > r e n d e z v o u s c n a m e
"computer name"
• The computer name can be en-
tered using up to 63 alphanu-
meric characters.
❖ rendezvous Installation location infor-
mation setting
You can enter information about the
location where the printer is installed.
msh> rendezvous location
"location"
• Information about location can
be entered using up to 32 alpha-
numeric characters.
❖ Setting order of priority for each protocol
• diprint
msh> rendezvous diprint
[0–99]
• lpr
msh> rendezvous lpr [0–99]
4
95