Lanier LD225 Network Manual page 49

Limitation
❒ Enter an e-mail address using up
to 128 alphanumeric characters.
❒ Enter a user name using up to
64 alphanumeric characters.
❒ Enter a password using up to 64
alphanumeric characters.
❖ Scanner Recall Interval Time
Specifies the interval the machine
waits before resending scan file, if
they cannot be sent to the delivery
server or mail server.
Note
❒ Default: 300 seconds
❒ The interval time can be set from
60 to 900 seconds in one second
increments, using the number
keys.
❒ This setting is for the scanner
function.
❖ Number of Scanner Recalls
Sets a maximum number of times
scan file is resent to the delivery
server or mail server.
• On: 3 time(s)
• Off
Note
❒ Default: On/3 time(s)
❒ If [On] is selected, the number of
times can be set from 1 to 99 us-
ing the number keys.
❒ This setting is for the scanner
function.
Programming, changing, or deleting an
e-mail message
Limitation
❒ Enter a name using up to 20 alpha-
numeric characters.
❒ Enter up to five lines of text. Each
line can consist of up to 80 alpha-
numeric characters.
Setting Up the Machine on a Network
A
Press the {User Tools/Counter/Inquiry}
key.
B
Press [System Settings].
C
Press [File Transfer].
D
Press [T Next].
The next screen appears.
E
Press [Program / Change / Delete E-mail
Message].
Programming an e-mail message
A Press [*Not Programmed].
B Press [Change], and then enter
the name.
Reference
For more information about
entering text, see "Entering
Text", General Settings Guide.
C Press [OK].
D Press [Edit], and then enter the
text.
To start a new line, press [OK] to
return to the e-mail message
screen, and then press [T] in [Se-
lect Line to Edit:].
E Press [OK].
The e-mail message screen ap-
pears.
F Press [OK].
Changing an e-mail message
A Select the e-mail message to
change.
B If you want to change the sub-
ject, press [Change].
C Change the subject, and then
press [OK].
D Press [U] or [T] to select the
line to change.
2
43