Lanier LD225 Network Manual page 92

Monitoring and Configuring the Printer
Item
Subject
From
Note
❒ A mail message must be within
4
1 MB in size.
❒ E-mail may be incomplete if sent
immediately after power on.
❖ Subject field
Format: devicestatus?parameter-
n a m e = p a r a m e t e r [ & = p a r a m e -
ter][&=parameter]...
Note
❒ The Subject field is case-insensi-
tive.
❒ Parameter names can be written
in any order.
❖ Subject field coding examples
Coding example
devicestatus?re-
quest=syscon-
fig&format=text&l
ang=en
devicestatus?re-
quest=sysconfig
❖ Parameters
Parameter
request
86
Description
Enter a request re-
garding the device.
For details, see the
table below.
Specify a valid
mail address. The
device information
will be sent to the
address specified
here.
Action
The device's sys-
tem configuration
information will be
sent in an English
text format.
The device's sys-
tem configuration
information will be
sent in a preset for-
mat and language.
Meaning Default
Informa- Mandatory
tion to be
obtained
Parameter Meaning
format Mail format Mail will be
lang Language
for mail
body
❖ Parameters specifying the
information to be obtained
Information to be Parameter
obtained
System configura- sysconfig
tion information
Network configu- netconfig
ration information
Printer configura- prtconfig
tion information
Supplies informa- supply
tion
Device status in- status
formation
❖ Parameters specifying the mail
format
Mail format Parameter
Text text
HTML html
XML xml
Note
❒ HTML and XML can be selecet-
ed for subject field, but output is
text only.
Default
sent in the
format pre-
set for each
mail ad-
dress.
Mail will be
sent in the
language
preset for
each mail
address.