Lanier LD225 Network Manual page 114

Monitoring and Configuring the Printer
Cover Open: Finisher Upper-R
Cover Open: Front Cover
Cover Open: Fusing Unit Cover
Cover Open: Lower Right Cover
Cover Open: Right Cover
Cover Open: Shift Tray Cover
Cover Open: Upper Right Cover
Data Size Error
Empty: Black Toner
Empty: Cyan Toner
4
Empty: Magenta Toner
Empty: Toner
Empty: Yellow Toner
Energy Saver Mode
Error
Error: Address Book
Error: Command Transmission
Error: DIMM Value
Error: Ethernet Board
Error: HDD Board
Error: IEEE1394 Board
Error: Media Link Board
Error: Memory Switch
Error: Optional Font
Error: Optional RAM
Error: Parallel I/F Board
Error: PDL
Error: Rem. Certificate Renewal
Error: USB Board
Error: USB Interface
Error: Wireless Card
Error: Wireless Card or Board
108
Messages Description
A upper right cover of Finisher is open.
The front cover is open.
The cover of the fusing unit is open.
The lower right cover is open.
The right cover is open.
The shift tray cover is open.
The upper right cover is open.
The data size error occurred.
The black toner cartridge is almost empty.
The cyan toner cartridge is almost empty.
The magenta toner cartridge is almost empty.
The toner cartridge is almost empty.
The yellow toner cartridge is almost empty.
The machine is in Energy Saver Mode.
An error has occurred.
An error has occurred in the data of the address book.
An error has occurred in the machine.
A memory error occurred.
An Ethernet board error has occurred.
A hard disk drive board error has occurred.
An IEEE 1394 interface board error has occurred.
An error has occurred on the media link board.
A memory switch error has occurred.
An error has occurred in the font file of the machine.
An error has occurred in the optional memory unit.
An error has occurred in the parallel interface.
An error has occurred in the page description lan-
guage.
An error has occurred in the remote sever renewal.
An error has occurred in theUSB interface board.
An error has occurred in the USB interface.
Wireless card is not inserted during start up, or the
IEEE 802.11b interface unit or the wireless card is tak-
en out after start up .
An error has occurred in the IEEE 802.11b interface
unit.