Toshiba e-studio3511, e-studio4511 Manual page 327

The followings are two output channels which are linked with the door switch.
(1) +5.1V
+5.1VD : CN466
(2) +24V
+24VD1 : CN465
+24VD1 : CN469
+24VD1 : CN470
+24VD2 : CN465
+24VD3 : CN467
+24VD4 : CN467
+24VD4 : CN467
+24VD5 : CN468
<<Output connector>>
Not linked with the door switch
CN464
CN466
CN467
CN468
CN469
Linked with the door switch
CN465
CN466
CN467
CN468
CN469
CN470
November 2003 © TOSHIBA TEC
Pins 11 and 12
Output to the LGC board
Pins 1 and 2
Output to the LGC board, CCL board (via LGC board), Bridge unit (via LGC
board)
Pins 1 and 2
Output to the PFP/LCF
Pin 1
Output to the power supply cooling fan
Pins 5 and 6
Output to the DRV board
Pins 1 and 2
Output to the RADF
Pin 9
Output to the SDV board
Pins 11 and 13
Output to the SLG board
Pin 3
Output to the finisher
For the SYS board
For the LGC board, FAX board, CCL board (via LGC board), PFP/LCF (via
LGC board), Bridge unit (via LGC board)
For the SLG board, RADF
For the finisher
For the FIL board / FUS board
For the LGC board, DRV board, CCL board (via LGC board), Bridge unit
(via LGC board)
For the LGC board
For the SLG board, SDV board, RADF
For the finisher
For the PFP/LCF
For the power supply cooling fan
18 - 3 e-STUDIO3511/4511 POWER SUPPLY UNIT
18