Toshiba e-studio3511, e-studio4511 Manual page 238

(13) Take off the black toner cartridge.
(14) Remove 2 screws, release the harness from
the hook and pull out the toner case by rotating
it a little.
(15) Remove 2 screws.
12
(16) Disconnect 2 connectors and take off the toner
supply unit by lifting up and pulling out toward
you to release it from the catch.
(17) Remove 1 screw and disconnect 1 connector
from the bracket. Then take off the black toner
cartridge switch with the whole bracket.
e-STUDIO3511/4511 DEVELOPER UNIT
Toner case
Fig. 12-838
Toner supply unit
Fig. 12-839
Fig. 12-840
Fig. 12-841
12 - 26
Hook
Harness
Connector
Black toner
cartridge switch
November 2003 © TOSHIBA TEC